210 Series – Balanced Valve Design

210 Series

Balanced Valve Design

210D – 210 SERIES

The 210 Series is a lockup charac­ter­istic regulator. Its balanced valve design makes it possible to maintain steady outlet pressure control with widely varying inlet pressures. The regulator has an integrated dampening mechanism in the breather outlet and the sensing tube to improve regulating stability and reduce hunting tendencies. The 210 Series provides precise regulation over a wide range of pressures and flow rates. Applications include gas‐fired boilers, steam gener­ators, indus­trial furnaces, and ovens.

  Specifications:

  • Pipe Sizes:
    • 210D, 210E, 210G: Rp 1″ to Rp 3″ threaded connec­tions according to ISO 7–1/EN10226-1
    • 210J: DN100 flanged connec­tions according to ISO 7005–2, PN 16
  • Housing Material:
    • 210D, 210E, 210G: Aluminum
    • 210J: Cast iron
  • Internal Components Material: Steel, aluminum, brass, elastomer
  • Mounting: Mount in an upright position only. Other than upright position will result in a slight differ­encein outlet pressure. Install with gas flowing as indicated by the arrow on bottom casting.
  • Construction and Design/Certifications: According to EN88 and Gas Appliances Directive 2009/142/EC
  • Gas Types: Suitable for gases of EN 437 gas family 1, 2, and 3
  • Maximum Inlet Pressure: 85 kPa
  • Ambient Temperature Range: -15 °C to 80 °C

Dimensions:

Model Pipe Sizes Swing  Radius A B C D
210D… Rp 1″, Rp 1 ¼”, Rp 1 ½” 138 mm 228 mm 60 mm 152 mm 178 mm
210E… Rp 1 ½”, Rp 2″ 211 mm 286 mm 75 mm 203 mm 232 mm
210G… Rp 2 ½”, Rp 3″ 302 mm 419 mm 116 mm 300 mm 343 mm
210J… DN100 467 mm 616 mm 138 mm 349 mm 457 mm
TitleDescriptionDownload
GDR.GF-LT-...

Gas Pressure Regulators & Filters – Technical Literature

DownloadPreview