Gas Pressure Regulators

Gas Pressure Regulators

For various kinds of gases

GV30 Valve

Maxitrol Company manufac­tures a complete line of gas pressure regulators for domestic, commercial, and indus­trial needs with models for both low and inter­me­diate pressure appli­ca­tions.

Maxitrol Company manufac­tures a complete line of gas pressure regulators for domestic, commercial, and indus­trial needs with models for both low and inter­me­diate pressure appli­ca­tions.

GV30 Valve

RUBBER SEAT POPPET DESIGN The compact RV poppet regulators are designed primarily for main burner and pilot load appli­ca­tions. Typical appli­ca­tions include residential and commercial cooking appli­ances, barbecues, hearth products, and pilot lines. Maxitrol rubber seat poppet models offer the ultimate in design features and perfor­mance capabil­ities to meet your specific appliance or utility require­ments.

 

STRAIGHT-THRU-FLOW DESIGN

Maxitrol’s original straight-thru-flow (STF) design regulators are non-lockup type regulators for high capac­ities at low inlet pressures. The difference between STF design and other type regulators is the conical valve. The cone principal permits gas to flow straight through the regulator without changing direc­tions. Frictional flow resis­tance is reduced, resulting in greater capacity. An improved flow pattern provides accurate, sensitive regulation at extremely low pressure differ­en­tials. Typical appli­ca­tions include residential, commercial, and indus­trial gas-fired appli­ances and equipment used on low or medium pressure gas supplies.

LEVER ACTING DESIGN

Maxitrol’s 325 Series regulators are for use on residential, commercial, and indus­trial appli­ca­tions. The 325 Series features a high leverage valve linkage assembly to deliver a lockup charac­ter­istic. The regulators are capable of precise control from full flow down to pilot flow.

BALANCED VALVE DESIGN

The R & RS Series’ double diaphragm balanced valve design makes it possible to maintain steady outlet pressure control with widely varying inlet pressures. The regulator is physi­cally small yet has excep­tional capacity charac­ter­istics. R & RS Series regulators are intended for use with both main burner and pilot load appli­ca­tions. They are ideally suited for use with infrared heaters and pilot lines on large indus­trial heaters and boilers.

BALANCED VALVE DESIGN

The 210 Series is a lockup charac­ter­istic regulator. Its balanced valve design makes it possible to maintain steady outlet pressure control with widely varying inlet pressures. The regulator has an integrated dampening mechanism in the breather outlet and the sensing tube to improve regulating stability and reduce hunting tendencies. The 210 Series provides precise regulation over a wide range of pressures and flow rates. Applications include gas-fired boilers, steam gener­ators, indus­trial furnaces, and ovens.

ZERO PRESSURE REGULATOR DESIGN

The RZ and 210Z Series are adaptable for air-gas mixing appli­ca­tions. Because of the balanced valve construction, Z‑models offer superior perfor­mance at an economical price compared with other types of atmos­pheric regulators. Maxitrol’s RZ and 210Z Zero Governor Pressure Regulator models regulators are used for flow control of burners, nozzel mixers, mixing tees and propor­tional premixers.