myfire App Training Videos

myfire App

Training Videos

Initial App Setup

Installing and setup of the my fire app.


Manual Mode

Manually decrease or increase flame height.

1. Select Manual Mode from the left sidebar.
2. Touch the color wheel to decrease or increase flame height.  Blue is low flame and red is high flame.

For instant adjustment, touch small flame icon for low fire or large flame icon for high fire. Touch standby icon for pilot flame.


Thermostatic Mode

The room temper­ature is measured and then compared to the set temper­ature. The flame height automat­i­cally adjusts to achieve the set temper­ature.


Countdown Timer

At the end of a preset countdown time, the fire turns off.

1. Select Countdown Timer from the left or right/bottom sidebars.
2. Spin the hour wheel to set hour.  Spin the minute wheel to set minutes.
3. Touch power button to start Countdown Timer.

The time remaining is shown on top of screen next to hourglass icon.

4. Touch power button to stop Countdown Timer.

NOTE: Countdown Timer only works in Manual, Thermostatic, and Eco modes.


Program Mode

Each of 8 programs can be set to go ON and OFF at specific times at set temper­a­tures.

1. Select Program Mode from the left sidebar.
2. Turn ON desired Program (1 – 8) by touching the power button.
3. To change days, times, or ON/OFF temper­ature, touch the program number (circle 1).
4. Touch the section of the setting wheel to be changed (time, temp, day).  Change the setting.
5. Confirm your changes by touching the yellow checkmark.

NOTE: To delete a program, touch that program number and go to program settings. Touch red CLEAR button and then touch the red check mark.


Eco Mode

Save energy while enjoying a changing, realistic flame picture.

1. Select Eco Mode from the left sidebar.
2. Choose between low fire, medium fire, and high fire.
3. Choose time button (15 min, 20 min, or 25 min).  The percentage of energy saved is shown in the circle/leaf.

NOTE: A shorter time cycle results in a more active flame picture.

Automatic Energy Saving Mode

Corresponds to the set temper­ature in Thermostatic Mode.

1. Touch/slide auto temper­ature button next to flame button to ON.

If the room temper­ature is lower than the set temper­ature, the flame height stays on high for a longer period of time. If the room temper­ature is higher than the set temper­ature, the flame height stays on low for a longer period of time.

2. Choose the time button (15 min, 20 min, or 25 min).  The percentage of energy saved is shown in the circle/leaf.

NOTE: A shorter time cycle results in a more active flame picture.


Fan

Circulating fan has 4 speed levels from low (1) to high (4).

1. Select Fan from the left or right/bottom sidebars.
2. Touch power button to start Fan.

The fan turns on at a preset level.

3. Touch or slide to increase or decrease fan speed.
4. Touch fan icon or power button again and fan turns OFF.

NOTE: The fan works with fire ON or OFF.


Light/Dimmer

Light adjusts from 20% to 100%

1. Select light from the left or right/bottom sidebars.
2. Touch power button to turn light ON.

Light turns on at preset level.

3. Slide circle from bottom to top to adjust light from 20% to 100%.
4. Touch light icon or power button again and the light turns off.

NOTE: Light works with fire ON or OFF.


AUX

Operate an additional function, e.g. a second burner.

1. Select AUX from the left or right/bottom sidebars.

Additional function turns ON.

2. Touch AUX icon again and the additional function turn OFF.


Profiles

Save individual fireplace settings in up to 4 different profiles.

1. Select Profile from the left sidebar.
2. Select 1 of the 4 programs.

NOTE: Selecting a profile for the first time saves current fireplace settings to that profile.

3. Change a setting and a pop‐up asks if you want to save the change to that profile.
4. Exit profile by changing a profile setting, and not saving change in pop‐up.


Child Safety Lock

Renders smart device inoperable except for the OFF function and infor­mation page.

NOTE:  Symax handset must be locked separately.

1. Select Safety Lock from the left sidebar.

A pop‐up shows user the Child Safety Lock is ON, and the Safety Lock icon appears on the lower right quarter of the home screen’s blue temper­ature circle.

2. To deactivate Child Safety Lock, touch the Child Safety Lock icon in the left menu and on the lower right quarter of the blue temper­ature circle simul­ta­ne­ously for 2 seconds.